Optimization of Emulsion possessing of lycopene in Arabic Gum and Maltodexterin by Response Surface Methodology

Document Type : Complete scientific research article

Authors

Abstract

Background and objectives: Lycopene is a carotenoid pigment with positive effects on human health. It has been proved that lycopene can prevent some severe diseases such as cancer but because of multi unsaturated bonds, it is very sensitive to environmental conditions. Its fast deterioration during processing, always was a reason for not being used commonly in food industry. A method for controlling its deterioration is encapsulation and covering it by biopolymers in capsules. Due to lycopene is not a polar agent, the first step is producing emulsions with high stability.
Material and Methods: In this investigation, Arabic gum and Maltodexterin were used as water soluble solid materials in lycopene emulsions. In order to prepare emulsions, lycopene was solved in edible oil to make a 5% oily lycopene, then Arabic gum and Maltodextrin were solved in distilled water separately and stayed over a night to be sure of complete solvation, then prepared materials were used for emulsion production step. During emulsion processing, speed of homogenizer rotation (rpm), percentage of solid materials (w/w) and lycopene (w/w) were considered as independent variables and results were optimized by using Response Surface Methodology (RSM) method and Central Composite Design (CCD). Alpha was “1” because face center option was chosen. The software which was used to optimize the process was “design expert version 6.0.2. According to RSM worksheet, effect of three independent variable including speed of homogenizer (14000-18000 rpm), percentage of solid materials (Arabic gum+ Maltodexterin, 30-40% w/w) and percentage of lycopene (10-20% w/w)on three dependent variable including droplet size, creaming index and viscosity as response was investigated.
Results and Discussions: Results showed that, homogenizer speed and percentage of solid materials and lycopene, had significant effect (p < 0.05) on all dependent variables. Higher speeds of homogenizer resulted to smaller droplet size and less creaming index but viscosity raised dramatically. Inversely, Increasing of solid materials in system, resulted to lowering droplet size and creaming index but increased viscosity. On the other hand, with increasing lycopene content, droplet size, creaming index and viscosity were increased. Finally, by optimizing the process by RSM, best conditions for producing a stable emulsion could be achieved by using 37.025 w/w solid materials, 19.52% w/w lycopene and at speed of 18000 rpm.
Conclusion: Results showed that in order to produce a proper and stable emulsion, it is necessary to increase speed of homogenizer and amount of solid materials but this should not cause very high viscosity and re-coalescence of droplets due to over processing which can effect emulsion stability.

Keywords

Main Subjects


Batista, A.P., Raymundo, A., Sousa, I., Empis, J. and Franco, J.M. 2006. Colored food emulsions implications of pigment addition on the rheological behavior and microstructure. FOBI. 1: 216-227.
Blanch, G.P., Castillo, M.L.R., Caja, M. M., Me'ndez, M. P. and Corte's, S. S. 2007. Stabilization of all Trans lycopene from tomato by encapsulation using cyclodextrins. Food Chemistry. 105: 1335-1341.
Boom, R.M. 2008. Food material science, emulsions: principles and preparation, 1th Ed. New York: Springer, Pp. 305-339.
Box, G., Hunter, J.S. 1957. Multifactor experimental designs for exploring response surfaces. Analysis of Mathemathics and Statistics. 28: 195-241.
Chanamai, R., McClements, D.J. 2001. Prediction of emulsion color from droplet characteristics: dilute mono disperse oil-in-water emulsions. Food Hydrocolloids. 15: 83-91.
Choski, P.M. and Joshi, V.Y. 2007. A review on lycopene -extraction, purification, stability and application. International Journal of Food Properties. 10: 289-298.
Daik, R., Bidol, S., Abdullah, I. 2007. Effect of molecular weight on the droplet size and rheological properties of liquid natural rubber emulsion. Malaysian Polymer Journal. 2: 1. 29-38.
Dluzewska, E., Stobiecka, A., and Maszewska, M. 2006. Effect of oil phase concentration on rheological properties and stability of beverage emulsions. ACTA Scientiarum Polonorum Technologia Alimentaria. 5: 2. 147-156.
Gardouh, A.R., Ghorab, M.M., and. Abdel-Rahman, S.G.S. 2012. Effect of Viscosity, Method of Preparation and Homogenization Speed on Physical Characteristics of Solid Lipid Nanodroplets. ARPN Journal of Science and Technology. 2: 10. 966-1006.
Gharibzahedi, S.M.T., Mousavi, S.M., Hamedi, M. and Khodaiyan, F. 2011. Application of response surface modeling to optimize critical structural components of walnut beverage. Emulsion with respect to analysis of the physicochemical aspects. Food and Bioprocess Technology. 10: 763-768.
Gharibzahedi, S.M.T., Mousavi, S.M., Hamedi, M., Ghasemlou, M. 2012. Response surface modeling for optimization of formulation variables and physical stability assessment of walnut oil in-water beverage emulsions. Food Hydrocolloids. 26: 293-301.
Gharsallaoui, A. Roudaut, G., Chambin, O., Voilley, A. Saurel, R. 2007. Applications of spray-drying in microencapsulation of food ingredients. Food Research International. 40: 1107-112.
Ghorab, M.M., Abdel-salam, H. M. and Abdel-Moaty, M.M. 2004. Solid lipid Nanoparticles-effect of lipid matrix and surfactant on their physical characteristics. Bulletin of Pharmaceutical Sciences, Assiut Journal of agricultural sciences. 27:155-159.
Goula, A.M., Adamopoulos, K.G., Chatzitakis, P.C. and Nikas, V A. 2006. Prediction of lycopene degradation during a drying process of tomato pulp. Food Engineering. 74: 37-46.
Haznedar, S., and Dortunc, B. 2004. Preparation and in vitro evaluation of Eudragit microspheres containing acetazolamide. International Journal of Pharmacy and Pharmaceutical Sciences. 269: 1. 131-140.
Hogan, S.A., McNamee, B.F., O’Riordan, E. D. and O’Sullivan, M. 2001. Emulsification and microencapsulation properties of sodium caseinate/carbohydrate blends. International Dairy Journal. 11: 3. 137-144.
Hogan, S.A., O’riordan, E.D. and O’sullivan, M. 2003. Microencap-sulation and oxidative stability of spray-dried fish oil emulsions. Journal of Microencapsulation. 20: 5. 675-688.
Huang, X., Kakuda, Y. and Cui, W. 2001. Hydrocolloids in emulsions: particle size distribution and interfacial activity. Food Hydrocolloids. 15: 533-542.
Ilia Anisa, A.N., Nour, A.H. 2010. Effect of viscosity and droplet diameter on water-in-oil (w/o) emulsions: an experimental study. World Academy of Science, Engineering and Technology. 38: 691-694.
Jafari, S. M., He, Y. and Bhandari, B. 2007. Optimization of nano-emulsion production by microfluidization. European Food Research and Technology. 225: 733-741.
Jafari, S.M., Assadpoor, E.B. and He, Y. 2008a. Nano-particle encapsulation of fish oil by spray drying. Food Research International. 41: 172-183.
Jafari, S.M., Assadpoor, E., He, Y., Bhandari, B. 2008b. Encapsulation efficiency of food flavors and oils during spray drying. Drying Technology. 26: 7. 816-835.
Jafari, S.M., Beheshti, P. and Assadpoor, E. 2012. Rheological behavior and stability of D-limonene emulsions made by a novel hydrocolloid (Angum gum) compared with Arabic gum. Journal of Food Engineering. 109: 1-8.
Kaushik, V. and Roos, Y.H. 2007. Limonene encapsulation in freeze-drying of gum Arabic-sucrose-gelatin system. Food Science and Technology. 40:1381-1391.
Krieger, I.M. and Dougherty, T.J. 1959. A mechanism for non-Newtonian flow in suspensions of rigid spheres. Transaction of the Society of Rheology. 3:137–152.
Krishnan, S., Bhosale, R. and Singhal, R.S. 2005. Microencapsulation of cardamom oleoresin: Evaluation of blends of gum arabic, maltodextrin and a modified starch as wall materials. Carbohydrate Polymers. 61:1. 95-102.
Kvanaugh, C.J., Trumbo, P.R. and Ellwood, K. C. 2007. The US food and drug administration’s evidence-based review for qualified health claims: Tomatoes, lycopene and cancer. Journal of the National Cancer Institute. 99: 1074-1085.
Liu, X.D., Atarashi, T., Furuta, T., Yoshii, H., Aishima, S., Ohkawara, M. and Linko, P. 2001. Microencapsulation of emulsified hydrophobic flavors by spray drying. Drying Technology. 19: 7. 1361-1374.
Li, J.L., Cheng, Y.Q., Wang, P., Zhao, W.T., Yin, L.J. and Saiyo, M. 2012. A novel improvement in whey protein isolates emulsion stability: generation of an enzymatically cross-linked beet pectin layer using horseradish peroxidase. Food Hydrocolloids. 26: 448-455.
Muthuvelayudham, R. and Viruthagiri, T. 2010. Application of Central Composite Design Based Response Surface Methodology in Parameter Optimization and on Cellulase Production Using Agricultural Waste. International Journal of Chemical and Biological Engineering. 3: 2. 97-104.
Mason, T.G. 1999. New fundamental concepts in emulsion rheology. Current Opinion in colloid and interface science. 4: 231-238.
Matsumiya, K., Takahashi, W., Inoue, T. and Matsumura, Y. 2010. Effects of bacteriostatic emulsifiers on stability of milk-based emulsions. Journal of Food Engineering. 96: 185-191.
McClements, D. J. 2005. Food emulsions: Principles, practice, and techniques. 2nd ed, BocaRaton, FL: CRC Press, p. 609.
Mehnert, W., Mader, K. 2001. Solid lipid Nano-droplets: production, characteriza-tion and applications. Advanced Drug Delivery Reviews. 47: 165-196.
Nunes, I. L. and Mercadante, A. Z. 2007. Encapsulation of Lycopene Using Spray-Drying and Molecular Inclusion Processes. International Journal of Brazilian Archives of Biology and Technology. 50: 5. 893-900.
Quemada, D. and Berli, C. 2002. Energy of interaction in colloids and its implications in rheological modeling. Journal of Colloid and Interface Science. 98: 51-85.
Rabins, M.M. 2000. Emulsions creaming phenomena. Current Opinion in colloid and interface science. 5: 265-272.
Rocha, G. A., Trindade, C. S. F. and Grosso, C.R.F. 2012. Microencapsu-lation of lycopene by spray drying: characterization, stability and application of microcapsules. Food and Bio products processing. 90: 37-42.
Shu, B., Yu, W., Zhao, Y. and Liu, X. 2006. Study on microencapsulation of lycopene by spray drying. Food Engineering. 76: 664-669.
Sun, C., Gunasekaran, S. and Richards, M. P. 2007. Effect of xanthan gum on physicochemical properties of whey protein isolate stabilized oil-in-water emulsions. Food Hydrocolloids. 21: 555-564.
Sun, C., and Gunasekaran, S. 2009. Effects of protein concentration and oil phase volume fraction on the stability and rheology of menhaden oil-in-water emulsions stabilized by whey protein isolate with xanthan gum. Food Hydrocolloids. 23: 165-174.
Taherian, A.R., Britten, M., Sabik, H. and Fustier, P. 2011. Ability of whey protein isolate and/or fish gelatin to inhibit physical separation and lipid oxidation in fish oil-in-water beverage emulsion. Food Hydrocolloids. 25: 868-878.
Tcholakova, S. 2010. Drop size in concentrated emulsions, obtained by rotor-stator homogenization. 5th World congress on emulsion, Lyon, France, 12-14 October.
Trotta, M., Cavalli, R., Carlotti, M. E. Battaglia, L.and Debernardi, F. 2005. Solid lipid micro-particles carrying insulin formed by solvent in water emulsion diffusion technique. International Journal of Pharmaceutics. 288: 2. 281-288.
Ushikobo, F. Y. and Cunha, R. L. 2014. Stability mechanisms of liquid water-in-oil emulsions. Food Hydrocolloids. 34: 145-153.
Vivas, N., Vivas, D. G. N., Nonier, M. F and Nedjma. M. 2001. Effect of gum Arabic on wine astringency and colloidal stability. Progres Agricole et Viticole. 118: 8. 175-176.
Vivek, K., Reddy, H. and Murthy, R. S. R. 2007. Investigation of the effect of the lipid matrix on drug entrapment, in vitro release and physical stability of olanzapine-loaded solid lipid nanoparticles. American association of pharmaceutical scientists. 8: 4. 1-9.
Watson, D. J., and Mackley, M. R. 2002. The rheology of aqueous emulsions prepared by direct emulsification and phase inversion from a high viscosity alkyd resin. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 196: 121-134.
Webb, J. L. A. 2009. The trade in gum Arabic: Prelude to French Conquest in Senegal. The Journal of African History. 26: 149-168.
Yuan, Y., Gao, Y., Mao, L. and Zhao, J. 2008. Optimization of conditions for the preparation of b-carotene Nano- emulsions using response surface methodology. Food Chemistry. 107: 1300-1306.
Zhi, W. and Shichang, W. 2000. Effect of continuous phase viscosity on membrane emulsification. Chinese Journal of Chemical Engineering. 8: 2. 108-112.